---
title: Using my own internet modem/router, not purchased from FASTfiber
description: "[The modem/router purchased from FASTfiber](https://www.fastfiber.be/support/fritzbox-7530-ax-modem-router/) is **already configured** and you just need to connect. If you want to use your own modem/router (not purchased from FASTfiber) for your fiber or VDSL connection, you will find more information below to configure…"
url: "https://www.fastfiber.be/en/support/using-my-own-internet-modem-router-not-purchased-from-fastfiber/"
updated: "2025-11-10"
category: Internet
---

# Using my own internet modem/router, not purchased from FASTfiber

[The modem/router purchased from FASTfiber](https://www.fastfiber.be/support/fritzbox-7530-ax-modem-router/) is **already configured** and you just need to connect. If you want to use your own modem/router (not purchased from FASTfiber) for your fiber or VDSL connection, you will find more information below to configure it manually, as well as the list of approved modems/routers.

# For FIBER (over the Proximus network)

## Modems and firmware that I can use on the FIBER network

For Fiber you can choose the brand and type of router yourself as long as it has the following specifications:

✓ Being able to build a PPP connection.
 ✓ Support VLAN 10 tagging.
 ✓ Have a gigabit Ethernet port (otherwise the speed is limited to 100 Mbps).

You then connect your router to the LAN port 1 of your Fiber NT (ONT).
 We recommend the router FRITZ!Box 7530 which we sell ourselves, fully support and with which you can also use the [Mesh WiFi bundle](https://www.fastfiber.be/en/support/mesh-wi-fi-bundle/) can connect to have good WiFi signal in all areas of your home.

### Example of manual settings for a Fritzbox for fiber.

1. Connect to the Wi-Fi of the Fritzbox and log in to the FritzBox GUI by typing the following in an internet browser (Chrome, Edge, Safari, etc.): http://fritz.box/

The password is shown on the sticker at the bottom of the modem.

![](https://www.fastfiber.be/wp-content/uploads/2022/01/Pasted-3.png)

In the menu on the left, click on "Account information" and then on the tab "Internet connection". If a wizard appears instead, you need to close it.

Choose "Other internet service provider" under Internet service provider.

Under "Connect via", select: Connection to an external modem or router.

![](https://www.fastfiber.be/wp-content/uploads/2022/01/Pasted.png)

Scroll down:

Under "Operating mode", select: Establish own connection to the internet.

In "Account information", enter [your internet username and password](https://www.fastfiber.be/support/waar-vind-ik-mijn-internet-gebruiker-en-wachtwoord/).

![](https://www.fastfiber.be/wp-content/uploads/2022/01/Pasted-1.png)

Scroll down:

Activate "Use VLAN for internet access" and enter the value 10 in VLAN-ID.

The configuration is complete. Click on Apply to activate your internet connection.

![](https://www.fastfiber.be/wp-content/uploads/2022/01/Pasted-2.png)

### Fiber modem I can use on the FIBER network

At the moment, you cannot yet use your own fiber modem, but [starting from 1/11/2024, that will change.](https://www.fastfiber.be/support/vanaf-1-11-2024-je-eigen-modem-gebruiken-die-niet-ondersteund-wordt-door-fastfiber/)

# For VDSL (over the Proximus network)

## Modems and firmware that I can use on the VDSL network

The following modems are officially certified for use on the national VDSL network in Belgium:
 ✓ Proximus BBOX3(v+)
 ✓ FRITZ!Box 3490 (firmware FRITZ!OS 6.52, 7.01, 7.12, 7.28, 7.29, 7.30 en 7.31)
 ✓ FRITZ!Box 7360 (v1 firmware FRITZ!OS 6.31, v2 firmware FRITZ!OS 6.52 en 6.53)
 ✓ FRITZ!Box 7430 (firmware FRITZ!OS 6.52, 7.01, 7.21, 7.28, 7.29 en 7.31)
 ✓ FRITZ!Box 7490 (firmware FRITZ!OS 6.52, 6.53, 7.01, 7.12, 7.28, 7.29 en 7.57)
 ✓ FRITZ!Box 7530 (firmware FRITZ!OS 7.02, 7.03, 7.12, 7.13, 7.28, 7.29, 7.56 et 7.57)
 ✓ FRITZ!Box 7530 AX (firmware FRITZ!OS 7.28, 7.29, 7.31, 7.56 en 7.57)
 ✓ FRITZ!Box 7590 (firmware FRITZ!OS 7.01, 7.12, 7.13, 7.28, 7.29, 7.56 en 7.57)
 ✓ FRITZ!Box 6890 LTE (firmware FRITZ!OS 7.01, 7.03, 7.12, 7.13, 7.28, 7.29, 7.56 en 7.57)

If you use another modem or FRITZ!OS version, your DSL line will be set to a fall-back profile, with a limited speed of 7.5 Mbps down and 0.5 Mbps up.

## Example for a Fritzbox

1. Select OTHER INTERNET PROVIDER
 2. Under Account Information, enter the DSL user and password.
 ![](https://www.fastfiber.be/wp-content/uploads/2022/01/FritzVDSLconfig.png)
 3. Choose Annex B
 4. Activate “Use VLAN for internet access” and enter the value 10 at VLAN ID.
 ![](https://www.fastfiber.be/wp-content/uploads/2022/01/Pasted-2.png)
 5. Configuration is complete. Click apply to activate your internet connection

 

 
